Dogwalk® Glass Fitting · Intermediate Dog Door
G-IDDSLW Glass Fitting Intermediate Dog Door Slim Line White
The Dogwalk® G-IDDSLW is a glass fitting intermediate dog door in white, manufactured from 100% high-impact polycarbonate. Its slim line frame is designed for single glazing and most single glazed sliding doors, accommodating glass from 4mm to 13mm thick. The white frame suits white-framed aluminium doors and white uPVC joinery. The intermediate size suits small to medium dogs. For double glazing, see the G-IDDW. Designed in New Zealand by Pet-Tek International since 1999.
Specifications
Glass Thickness
4mm – 13mm
Cut-Out Size
320mm dia (round)
Flap Size
240mm × 215mm
Compatible Glass
Single glazing, sliding doors
Finish
White
Recommended For
Small – Medium Dogs
Key Features
- White slim line frame — suits white aluminium and uPVC joinery
- Intermediate size — 240×215mm flap for small to medium dogs
- Suits single glazing 4–13mm including most sliding door glass
- Round 320mm cut-out — glazier drills a single hole
- No external screws — clean, seamless appearance
- Brush weather seal — draught-free, smooth and quiet operation
- 4-way locking with additional security pin
- 100% UV-stabilised high-impact polycarbonate construction
- Designed in New Zealand by Pet-Tek International since 1999
⚠️ Glazier Installation Required: The G-IDDSLW must be installed by a professional glazier. A 320mm diameter round hole is drilled through the glass using specialist equipment. Do not attempt DIY installation — incorrect cutting may crack or shatter the glass. For double glazing up to 32mm, see the G-IDDW.
Enquire About This Product →
Frequently Asked Questions
Both are white and share the same 320mm cut-out and 240×215mm flap. The G-IDDSLW is the slim line version suited to single glazing 4–13mm thick. The G-IDDW is the dual glaze version with a deeper frame accommodating glass up to 32mm, better suited to double-glazed units.
The intermediate dog door (G-IDDSLW) has a 240×215mm flap and a 320mm cut-out, suited to small to medium dogs. The standard dog door (G-DDSLW) has a larger 300×270mm flap and a 385mm cut-out, suited to medium to large dogs. If your dog is between sizes, go up to the standard door.
The G-IDDSLW suits glass from 4mm to 13mm thick, covering standard single glazing and most single glazed sliding doors. If your glass is thicker than 13mm, the dual glaze model G-IDDW suits up to 32mm.
No — the G-IDDSLW requires professional glazier installation. A 320mm round hole must be drilled through the glass using specialist equipment. Attempting DIY installation risks cracking or shattering the glass.
Yes — the G-IDDSLC is the clear slim line version with identical specifications, ideal where a virtually invisible frame is preferred.
