Dogwalk® Range
Dog Doors for Glass & Wood — Dogwalk® Range
Premium Dogwalk® dog doors designed in New Zealand since 1999. Glass fitting and wood fitting models for small, medium and large breeds — including dog doors for glass sliding doors and double glazing.
Ships to 20+ countries
Glass 3mm–32mm
Wood panels 11mm–52mm
Clear, white & black
Designed in NZ since 1999
3-year warranty
Dogwalk® dog doors are designed in New Zealand for glass sliding doors, timber panels and double glazing. Three breed sizes — intermediate, standard and maxi. Shipped worldwide from Auckland.
Dog Doors for Glass
For ranch sliders, double glazing and glass panels. Round cut-out installed by your glazier. Suits glass 3mm–32mm. Available in clear, white and black across standard and intermediate sizes. Slimline models available for narrow profiles behind sliding doors.
View glass range →Dog Doors for Timber & PVC Doors
For timber, PVC and metal doors. DIY installation with self-lining tunnel. Suits door panels 11mm–52mm. Available in white and brown, with tunnel extension models. Covers small and standard dog sizes.
View wood range →All Breed Sizes
Intermediate, standard and maxi sizes for small to large dogs
4-Way Locking
Set to open, in-only, out-only, or fully locked
Weatherproof Seal
Weather seal reduces draughts and keeps rain and insects out
Ships Worldwide
20+ countries from Auckland, NZ since 1999
Dog door size guide
Measure your dog’s shoulder height to find the right model. The flap opening should be at least as tall as your dog’s shoulder.
| Range | Suitable for | Shoulder height | Models |
|---|---|---|---|
| Maxi Pet Door | Large cats & small dogs | Up to ~300mm | G-SDDSL range |
| Intermediate Dog Door | Small–medium breeds | Up to ~380mm (~15kg) | G-IDD range, W-SDD range |
| Standard Dog Door | Medium–large breeds | Up to ~450mm (~20–25kg) | G-DD range, W-DD range |
Intermediate Dog Door
Suitable forSmall–medium breeds
ShoulderUp to ~380mm (~15kg)
Which dog door is right for you?
Choose Glass Fitting if…
- Your dog door will go into a glass panel, ranch slider, or double-glazed window
- You want a glazier to handle the round cut-out installation
- You need clear, white or black finish options
- Your glass is between 3mm and 32mm thick
- You need a slimline model to clear a sliding door frame
Choose Wood Fitting if…
- Your dog door will go into a timber, PVC or hollow-core door
- You want to install it yourself without a glazier
- Your door panel is between 11mm and 52mm thick
- You prefer a white or brown finish to match your door
- You need a tunnel model for thicker walls or panels
Not sure which dog door fits your breed and home?
Answer a few quick questions about your dog’s size and door type — get an instant recommendation.
Frequently Asked Questions — Dog Doors
Yes — the Dogwalk® glass fitting range is specifically designed for installation into glass doors and panels. The dog door fits into a round hole cut into the glass by a glazier. It cannot be installed into existing toughened or double-glazed glass — the glass panel must be replaced with a new one that has the cut-out pre-made at the time of manufacture. Your glazier can arrange this. View the full glass fitting dog door range.
For a glass sliding door or ranch slider, the slim line Dogwalk® models are the best choice — the G-DDSLC (clear) or G-DDSLW (white) for medium to large dogs, or the G-IDDSLC / G-IDDSLW for smaller breeds. The slim line frame is designed to sit within the track depth of a sliding door without interfering with the door’s operation. Dual glaze models are also compatible with ranch sliders if the glass thickness requires it.
Yes — the dual glaze Dogwalk® models accommodate glass from 3mm up to 32mm, covering most modern double-glazed panels. The G-DDC, G-DDW and G-DDB (standard) and G-IDDC, G-IDDW and G-IDDB (intermediate) all support double glazing. The existing double-glazed panel must be replaced with a new unit that has the round cut-out pre-cut — your glazier can arrange this.
The Dogwalk® range covers three size categories. The maxi pet door (195×185mm flap) suits large cats and small dogs. The intermediate dog door (240×215mm flap) suits small to medium breeds up to approximately 15kg. The standard dog door (300×270mm flap) suits medium to large breeds up to approximately 20–25kg. Always measure your dog at the shoulder — the flap opening height should be at least equal to this measurement. Use the Pet Door Selector for a personalised recommendation.
Both have the same flap opening size within each size category — the difference is the frame depth. Slim line models (G-DDSLC, G-DDSLW, G-IDDSLC, G-IDDSLW) have a lower-profile frame suited to thinner single-pane glass (4–20mm) and narrow sliding door profiles. Dual glaze models (G-DDC, G-DDW, G-DDB, G-IDDC, G-IDDW, G-IDDB) have a deeper frame accommodating glass up to 32mm, making them the right choice for double-glazed units and thicker panels.
Yes. Because the glass panel must be replaced rather than cut on-site, a glazier is required for glass fitting installations. The glazier orders a replacement panel with the round cut-out pre-cut to the correct diameter, removes the existing panel, fits the new one, and installs the dog door. Wood fitting Dogwalk® models can be DIY-installed into timber or PVC doors without a glazier. Contact us if you need guidance finding a glazier in New Zealand.
Yes. All Dogwalk® models include a weather seal to reduce draughts and keep rain and insects out. Security is managed via a 4-way manual locking dial — set to fully open, in-only, out-only, or fully locked. Security clips are also available for the glass fitting range as an additional locking measure. View security clips and accessories.
Glass fitting Dogwalk® models are available in clear, white and black across most size ranges. Clear suits aluminium joinery and modern glass doors. White suits white-frame joinery. Black suits dark-frame ranch sliders and contemporary homes. Wood fitting models are available in white and brown to match timber and PVC doors. Colour availability varies by model — check individual product pages for exact options.
Yes. Pet-Tek stocks replacement flaps, locking dials, security clips and seals for the full Dogwalk® range — including models manufactured over 20 years ago. Visit the Spares & Accessories page or contact us with your model number to order the correct part.
Yes. Pet-Tek International ships Dogwalk® dog doors worldwide from Auckland, New Zealand. We supply dog owners, glaziers, and pet retailers across New Zealand, Australia, the UK, Europe, the United States, South Africa, the Gulf region, and more than 20 countries in total. Contact us for a shipping quote to your location.
