Dogwalk® Wood Fitting
Wood Fitting Dog Doors for Timber, PVC & Metal Doors — Dogwalk® Range
A Dogwalk® wood fitting dog door is designed in New Zealand for DIY installation into timber, PVC and metal doors — no glazier required. Six models cover two dog sizes (Small and Medium) across slim line and tunnel variants, in white or brown to suit your door. Every door has a 4-way manual locking dial, a weather-resistant polycarbonate flap and a high-swing hinge design for reduced wear and longer-lasting performance. Manufactured by Pet-Tek International since 1999 and supplied to dog owners, retailers and distributors in 20+ countries — trade, wholesale and export enquiries welcome.
Panel 5mm–52mm
6 models
White & Brown
DIY installation
💡 DIY friendly: Wood fitting dog doors can be installed at home using basic tools. No glazier required. The self-lining tunnel on tunnel models requires no cutting. Full step-by-step instructions are included and available for download above.
All Wood Fitting Dog Door Models
Small dog door — slim line — suits panels 11–30mm · usable opening 180×227mm · white & brown
W-SDDWWood Fitting Small Dog Door — White
View →Panel: 11–30mmUsable opening: 180×227mm
Overall: 330×239mmFinish: White
W-SDDBWood Fitting Small Dog Door — Brown
View →Panel: 11–30mmUsable opening: 180×227mm
Overall: 330×239mmFinish: Brown
Small dog door — tunnel — suits panels up to 52mm · usable opening 180×227mm · white & brown
W-SDDTWWood Fitting Small Dog Door Tunnel — White
View →Panel: 11–52mmUsable opening: 180×227mm
Overall: 330×239mmFinish: White
W-SDDTBWood Fitting Small Dog Door Tunnel — Brown
View →Panel: 11–52mmUsable opening: 180×227mm
Overall: 330×239mmFinish: Brown
Medium dog door — suits panels 5–36mm · usable opening 270×307mm · white & brown
Not sure which model suits your dog and door?
Answer a few quick questions and get an instant recommendation.
Frequently Asked Questions — Dog Doors for Wooden Doors
Yes — the Dogwalk® wood fitting range is designed specifically for installation into timber, PVC, hollow-core and metal doors. You cut a rectangular opening in the door panel, then assemble the inner and outer frames from each side. No glazier is required. Models suit panels from 5mm to 52mm thick depending on the model. Contact us if you’re unsure which model suits your door.
The Small dog door (W-SDDW, W-SDDB, W-SDDTW, W-SDDTB) has a usable opening of 180mm wide × 227mm high (flap panel 180 × 240mm) and suits small dogs up to about 360mm at the shoulder, such as Jack Russells, Cavaliers, Pugs and French Bulldogs. The Medium dog door (W-DDW, W-DDB) has a larger 270mm × 307mm usable opening (flap panel 270 × 320mm) — specially developed for medium to semi-large dogs such as Beagles, Border Collies, Spaniels and Blue Heelers, up to a shoulder height of 450–500mm. Measure your dog standing: width at the widest point + 25mm must fit inside the opening width, body depth (top of shoulders to bottom of chest) + 25mm inside the opening height, and fit the door with the bottom of the opening level with the belly. See how to measure your dog or use the Pet Door Selector for a personalised recommendation.
Both share the same usable opening within the same size range. The slim line small dog door models (W-SDDW, W-SDDB) suit panels from 11mm to 30mm thick — ideal for standard hollow-core and lightweight timber or PVC doors. The tunnel models (W-SDDTW, W-SDDTB) include a self-lining tunnel extension that accommodates thicker panels up to 52mm, suited to solid timber doors or double-skin walls. No cutting of the tunnel is required.
Yes. Dogwalk® wood fitting dog doors are designed for DIY installation using basic tools such as a jigsaw, drill and screwdriver. No glazier is required. Cut a rectangular opening in the door panel, then assemble the inner and outer frames. The tunnel liner on tunnel models fits without any cutting. Full step-by-step installation instructions are included with every door and available to download above.
The Medium dog door (W-DDW, W-DDB) suits panels from 5mm to 36mm. The small dog door slim line (W-SDDW, W-SDDB) suits panels from 11mm to 30mm. The small dog door tunnel (W-SDDTW, W-SDDTB) suits panels from 11mm to 52mm. Measure your door panel thickness before ordering — and include any weather strip or architrave if it adds to the effective depth the unit must pass through. Contact us if you need help confirming compatibility.
Dogwalk® wood fitting dog doors are compatible with timber, PVC, hollow-core, and metal door panels. They are not suitable for glass panels — for glass door or ranch slider installations see the glass fitting dog door range. Always check your door panel thickness against the model specification before ordering.
All Dogwalk® wood fitting dog door models are available in white and brown. White suits painted timber doors, white PVC doors, and modern interiors. Brown suits natural timber, stained doors, and traditional homes. Both colours use the same UV-stabilised polycarbonate flap and internal components — colour is a finish choice only and does not affect performance or flap size.
Yes. All Dogwalk® wood fitting models include a weather-resistant polycarbonate flap and a brush or foam seal around the frame to reduce draughts and keep rain and insects out. The 4-way manual locking dial allows you to set the door to fully open, in-only, out-only, or fully locked — giving you full control over access and draught management at all times.
Yes. Pet-Tek stocks replacement flaps, locking dials and seals for the full Dogwalk® wood fitting range, including models manufactured over 20 years ago. Visit the Spares & Accessories page or contact us with your model number to order the correct replacement part.
Yes. Pet-Tek International ships Dogwalk® wood fitting dog doors worldwide from Auckland, New Zealand. We supply dog owners, pet retailers and trade customers across New Zealand, Australia, the UK, Europe, the United States, South Africa, the Gulf region, and more than 20 countries in total. Contact us for a shipping quote to your location.
