Catwalk® Glass Fitting
Cat Doors for Glass — Catwalk® Glass Fitting Range
Looking for a cat door for a glass door, ranch slider, or double-glazed panel? Catwalk® glass fitting cat doors install directly into the glass itself — no frame cutting, no wall modification. Designed in New Zealand since 1999, the round cut-out design is faster and cleaner for glaziers than rectangular alternatives. Whether you need a cat flap for a glass sliding door, a double-glazed window, or a single glass panel, there's a Catwalk® model to suit — including a battery-free multi-magnetic option to keep other cats out. Available in clear, white and black. Trusted by glaziers and cat owners across 20+ countries worldwide.
Glass 3mm–28mm
Cut-out 245–267mm dia
8 models
Clear, White & Black
⚠️ Important: Cat doors for glass cannot be installed into existing toughened or double-glazed glass. The glass panel must be replaced with the hole pre-cut at the time of manufacture. Your glazier can arrange this — contact us if you need guidance on the correct cut-out size.
Quick answer
Can you put a cat door in a glass door? Yes — a glazier replaces the glass panel with a new one that has a round hole (245mm or 267mm) pre-cut at manufacture, then fits the Catwalk® cat door into the hole. Existing toughened or double-glazed glass cannot be cut on-site. Most installations are complete in under an hour once the panel arrives.
All Glass Fitting Cat Door Models
Original cat door — small cats
G-CDCGlass Fitting Original Cat Door — Clear
View →Glass: 3–10mmOverall: 275×275mm
Cut-out: 245mm diaFlap: 193×165mm
G-CDWGlass Fitting Original Cat Door — White
View →Glass: 3–10mmOverall: 275×275mm
Cut-out: 245mm diaFlap: 193×165mm
Maxi pet door — slim line — large cats & small dogs
G-SDDSLCGlass Fitting Maxi Slim Line — Clear
View →Glass: 3–21mmOverall: 306mm
Cut-out: 267mm diaFlap: 203×187mm
G-SDDSLWGlass Fitting Maxi Slim Line — White
View →Glass: 3–21mmOverall: 306mm
Cut-out: 267mm diaFlap: 203×187mm
Maxi pet door — dual glaze — large cats & small dogs
G-SDDCGlass Fitting Maxi Dual Glaze — Clear
View →Glass: 3–28mmOverall: 306mm
Cut-out: 267mm diaFlap: 203×187mm
G-SDDWGlass Fitting Maxi Dual Glaze — White
View →Glass: 3–28mmOverall: 306mm
Cut-out: 267mm diaFlap: 203×187mm
G-SDDBGlass Fitting Maxi Dual Glaze — Black
View →Glass: 3–28mmOverall: 306mm
Cut-out: 267mm diaFlap: 203×187mm
Multi-magnetic — selective entry, battery-free
Not sure which model suits your glass and cat?
Answer a few quick questions and get an instant recommendation.
Watch: How a Glass Fitting Cat Door Is Installed
Watch the install — then give your glazier this
- Round cut-out size: 245mm (original & multi-magnetic) or 267mm (maxi)
- Your glass type & thickness: single or double glazing, 3–28mm
- The fitting instructions from the box — glass range and clamping detail
Any qualified glazier can do this — most complete it in under an hour. Toughened or sealed units need a new panel with the hole pre-cut.
Helpful Guides
How to Fit a Cat Door in GlassInstall Guide
Cat Flaps in Double Glazed GlassInstall Guide
Best Glass Fitting Cat & Dog DoorsBuyer's Guide
How to Choose the Right Cat FlapBuyer's Guide
Frequently Asked Questions — Cat Doors for Glass
Yes — but not into existing toughened or double-glazed glass. Glass cannot be cut after it has been toughened. Instead, the glass panel is replaced with a new one that has the round cut-out hole pre-cut at the time of manufacture. Your glazier orders the replacement panel to spec, fits it into your door or window frame, and installs the Catwalk® cat door into the hole. It is a straightforward job for any glazier and typically takes a few hours. Contact us for the correct cut-out diameter for your chosen model.
For a glass sliding door (ranch slider), the slim line models are the best choice. The G-SDDSLC (clear) or G-SDDSLW (white) maxi slim line suits large cats and small dogs, and the slim line frame is designed to sit within the track depth of a sliding door panel without interfering with the door's operation. For most standard domestic cats, the G-CDC or G-CDW original cat door is also suitable in single-pane ranch sliders up to 10mm. Use the Pet Door Selector for a personalised recommendation.
Yes. Because the glass panel must be replaced rather than cut on-site, a glazier is required. The glazier measures the opening, orders a replacement glass panel with the round cut-out pre-cut to the correct diameter, removes the existing panel, fits the new one, and installs the cat door. The Catwalk® round cut-out design is preferred by glaziers over rectangular alternatives because it is faster to specify, temper, and fit. Contact us if you need guidance finding a glazier in New Zealand.
Yes — the dual glaze maxi pet door models are specifically designed for double-glazed glass units. The G-SDDC, G-SDDW and G-SDDB accommodate glass from 3mm up to 28mm, covering most modern double-glazed panels. The deeper frame bridges both panes of the double-glazed unit while maintaining thermal performance. The existing double-glazed panel must be replaced with a new unit that has the cut-out pre-cut — your glazier can arrange this.
Both have the same 267mm cut-out diameter and the same 203mm × 187mm flap opening — the difference is the frame depth. The slim line (G-SDDSLC, G-SDDSLW) has a lower-profile frame suited to glass up to 21mm, ideal for ranch sliders and thinner panels. The dual glaze (G-SDDC, G-SDDW, G-SDDB) has a deeper frame accommodating glass up to 28mm, making it the right choice for double-glazed units and thicker glass panels.
Measure your cat at the shoulder — the flap opening height should be at least equal to this measurement. The original cat door (G-CDC, G-CDW) has a 193mm × 165mm flap and suits most standard domestic cats. The maxi pet door range has a 203mm × 187mm flap and suits larger cats and small dogs. The multi-magnetic G-MCDW has a 170mm × 155mm flap, best for average-sized cats. Use the Pet Door Selector or contact us with your cat's breed and weight if you're unsure.
The G-MCDW stays locked by default. Your cat wears a small C-M collar magnet which triggers the door to unlock automatically as they approach. No batteries or microchip reader required — it is entirely mechanical. Other cats or animals without the collar magnet cannot open the door, making it an effective way to keep neighbourhood cats out while allowing your own cat free access.
Catwalk® glass fitting cat doors are available in clear, white and black across most models. Clear suits aluminium joinery and modern glass doors. White suits white-frame joinery. Black suits dark-frame ranch sliders and contemporary homes. The G-MCDW multi-magnetic model is currently available in white only. Check individual product pages for exact colour availability, or contact us to confirm.
Yes. Replacement flaps are available for the Catwalk® glass fitting cat door range. Visit the Spares & Accessories page or contact us with your model number to order the correct replacement. Pet-Tek has supplied spare parts for its full range since 1999, so parts remain available for older models too.
Yes. Pet-Tek International ships Catwalk® cat doors worldwide from Auckland, New Zealand. We supply glaziers, pet retailers, and cat owners across New Zealand, Australia, the UK, Europe, the United States, South Africa, the Gulf region, and more than 20 countries in total. Contact us for a shipping quote to your location.
Glaziers, Retailers & Distributors
Stock the Catwalk® glass fitting range. Pet-Tek International is a New Zealand pet door company and wholesale supplier since 1999 — trade pricing, export support to 20+ countries, and local stock in Melbourne & Sydney for Australian trade buyers. The round cut-out design means faster, lower-risk jobs for glazing partners.
