Product Code
W-DDW
Barcode (GTIN-13)
09421006252933
Overall Size
403mm × 333mm
Download Install Manual (PDF) Download Catalogue (PDF)
💡 Installation tip: Install the dog door at the correct height — the bottom of the flap opening should sit level with the bottom of your dog's chest when standing. Full step-by-step instructions including height guidance are included and available to download above.
Dogwalk® Wood Fitting · Dog Door
W-DDW Wood Fitting Dog Door — White
The Dogwalk® W-DDW is a wood fitting dog door designed for medium-sized dogs, suitable for installation into timber, PVC and metal panels from 5mm to 36mm thick. It features a clip-on security cover and 4-way locking dials for enhanced security, a full brush weather seal for draught-free quiet operation, and a UV-stabilised high-impact polycarbonate flap. Easy to install at home with the supplied template. 3-year manufacturer's warranty. Designed in New Zealand by Pet-Tek International since 1999.
Specifications
Panel Thickness
5mm – 36mm
Locking
4-way + security cover
Flap Size
320mm × 270mm
Compatible Panels
Wood, PVC, Metal
Finish
White
Recommended For
Medium Dogs
Frame Projection
Inner Frame
10mm projection depth
Outer Frame
10.4mm projection depth
Key Features
- Clip-on security cover, additional security layer over the 4-way locking dials
- 4-way manual locking dials: open, in-only, out-only, fully locked
- Full brush weather seal — draught-free, smooth and particularly quiet for its size
- UV-stabilised high-impact polycarbonate flap — same material as aircraft windows
- All stainless steel screws, rust resistant for long-term durability
- Easy DIY installation using supplied cutting template, no glazier required
- Suits panels 5mm to 36mm — timber, PVC and metal doors
- 3-year manufacturer's warranty
- Designed in New Zealand by Pet-Tek International since 1999
⚠️ Panel thickness: The W-DDW suits panels from 5mm to 36mm only. For panels thicker than 36mm, a tunnel extension system is currently in development — contact our team to register your interest or discuss current options.
Enquire About This Product →
📏 Is this flap the right size for your dog? The W-DDW suits medium breeds up to roughly 20–25kg — Cocker Spaniels, Beagles, Border Collies, Whippets and similar — through its 320 × 270mm flap. Measure your dog at the shoulders and the widest point of the chest, and size up if they fall between doors. See how to measure your dog or use the Pet Door Selector before ordering.
Watch: How a Wood Fitting Dog Door Is Installed
Watch the install — then grab your tools
- Cutting template supplied in the box — mark the opening straight onto your door
- Panel range: 5–36mm for the W-DDW — timber, PVC or metal doors
- Fit at the right height: flap base level with the bottom of your dog’s chest when standing
DIY installation — no glazier required. A drill and a jigsaw are all you need.
Frequently Asked Questions
The W-DDW has a 320×270mm flap opening and is recommended for medium-sized dogs such as Cocker Spaniels, Beagles, Border Collies and Whippets, up to approximately 20–25kg depending on build. Always measure your dog at the shoulder and widest chest point before ordering. Use the Pet Door Selector for a personalised recommendation.
The W-DDW fits door panels from 5mm to 36mm thick, covering most standard timber, PVC and hollow-core metal doors. For panels thicker than 36mm, a tunnel extension system is currently in development. Contact our team to register your interest or discuss the best current option for your installation.
The W-DDW includes a clip-on security cover, an additional panel that attaches over the door frame from the outside, providing an extra layer of security on top of the standard 4-way locking dials. Particularly useful when leaving the door locked for extended periods.
Yes — the W-DDB is the brown version with identical specifications, better suited to darker timber doors and brown PVC frames.
Yes. Pet-Tek International ships worldwide from Auckland, New Zealand, supplying dog owners, pet retailers and trade customers across NZ, Australia, UK, Europe, the US, South Africa and more. Contact us for shipping enquiries.
The inner frame projects 10mm and the outer frame 10.4mm from the panel face. The flap-to-body gap is machined to a near-zero tolerance and finished with a full brush seal, so there is no daylight around the flap for a draught to use.
Retailers & Trade Buyers
Stock the W-DDW. Pet-Tek International is a dog door manufacturer and wholesale pet door supplier since 1999 — supplying pet stores, hardware chains, garden centres and glaziers in 20+ countries. Trade pricing, export support, and local stock in Melbourne & Sydney for Australian trade buyers.
