Catwalk® Wood Fitting · Cat Door

W-CDB Wood Fitting Slim Line Cat Door — Brown

The Catwalk® W-CDB is a slim line cat door in brown, designed for installation into timber, composite, metal and uPVC panels between 11mm and 30mm thick. Its low-profile brown frame suits darker timber doors and brown PVC frames. Easy to install at home using the template supplied — no glazier required. The magnetic flap closes quietly and securely after every use, while the brush weather seal keeps draughts out. Usable opening 155mm wide × 157mm high (flap panel 155 × 170mm), suited to average-sized cats up to about 7kg; larger cats of 7–10kg such as Maine Coons need the wood fitting maxi pet door (180 × 227mm). 3-year manufacturer's warranty*. Designed in New Zealand by Pet-Tek International since 1999.

Specifications

Panel Thickness
11mm – 30mm
Locking
4-way dial
Usable Opening (W × H)
155mm × 157mm
Flap Panel (W × H)
155mm × 170mm
Compatible Panels
Timber, Composite, Metal, uPVC
Finish
Brown
Recommended For
Cats up to about 7kg
Larger Cats (7–10kg)
Wood maxi range, 180mm × 227mm

Frame Projection

Inner Frame
11.5mm projection depth
Outer Frame
9.5mm projection depth

Key Features

  • Brown slim line frame — suits darker timber doors and brown PVC frames
  • Suits panels 11–30mm — timber, composite, metal & uPVC
  • Magnetic closure — small magnets on the flap and body hold it shut and return it to position
  • Full brush weather seal — reduces draughts and noise
  • 4-way locking dial — in only, out only, open both ways, or fully locked
  • UV-stabilised high-impact polycarbonate flap — same material as aircraft windows
  • Easy DIY installation using supplied template — no glazier required
  • 3-year manufacturer's warranty*
  • Designed in New Zealand by Pet-Tek International since 1999

Enquire About This Product →
📏 Is this flap the right size for your cat? Cats up to about 7kg suit this 155 × 157mm usable opening; larger cats of 7–10kg such as Maine Coons need the wood fitting maxi pet door (180 × 227mm) — learn how to measure your cat or see the cat flap buying guide before ordering.

Watch: How a Wood Fitting Cat Door Is Installed

Watch the install — then grab your tools
  • Cutting template supplied in the box — mark the opening straight onto your door
  • Panel range: 11–30mm for the W-CDB — timber, composite, metal or uPVC
  • Basic household tools — a drill and a jigsaw are all you need

DIY installation — no glazier required. Most people complete the job in under an hour.


Frequently Asked Questions

The W-CDB fits panels between 11mm and 30mm thick. This covers most interior timber doors, hollow-core doors, composite doors, metal panel doors and uPVC doors. If your panel is thicker than 30mm, the W-CDTB (brown tunnel) or W-CDTW (white tunnel) suit panels up to 52mm.
The W-CDB has a usable opening of 155mm wide × 157mm high, suited to average-sized cats up to about 7kg. Measure your cat standing at its widest point and its body depth (top of the back to the bottom of the chest) and add 25mm to each; if either figure exceeds the opening, or your cat is 7–10kg (Maine Coons, for example), choose the wood fitting maxi pet door with its 180 × 227mm opening. Use our Pet Door Selector for a personalised recommendation.
Yes: the W-CDB features a 4-way locking dial that lets you set the door to: in only, out only, open both ways, or fully locked — giving you full control over your cat's access at any time.
Yes: the W-CDB is designed for DIY installation and includes a cutting template to mark and cut the opening in your door panel. No glazier is required. Basic tools are all you need. Full step-by-step instructions are included in the box and available to download above.
Yes — the W-CDW is the white version with identical specifications. For thicker panels (11–52mm), the W-CDTW (white tunnel) and W-CDTB (brown tunnel) are also available.
The inner frame projects 11.5mm and the outer frame 9.5mm from the panel face. The flap-to-body gap is machined to a near-zero tolerance and finished with a full brush seal, so there is no daylight around the flap for a draught to use.

Retailers & Trade Buyers

Stock the W-CDB. Pet-Tek International is a cat door manufacturer and wholesale pet door supplier since 1999 — supplying pet stores, hardware chains, garden centres and glaziers in 20+ countries. Trade pricing, export support, and local stock in Melbourne & Sydney for Australian trade buyers.

Become a Distributor →
Ships to 20+ countries | +64 9 570 2001 | [email protected] | Designed in NZ since 1999
Contact Us
Menu
Home About Products → Glass Fitting Cat Doors → Glass Fitting Dog Doors → Wood Fitting Cat Doors → Wood Fitting Dog Doors → Multi Magnetic Cat Doors → Spares & Accessories Find My Door Become a Distributor Blog Contact Us Language / Region English (AU) English (UK) English (US) English (ZA) English (IE) Français (FR) Deutsch (DE) Italiano (IT) Polski (PL) Filipino (PH) العربية (AE) Español (MX) Português (BR) Español (AR)
Contact
WhatsApp
Call Us

Get In Touch

We reply within 1 business day